PH 13-8 Mo | 1.4534 |UNS S13800 |ASTM XM-13 | 13-8Mo

Stainless Steel PH 13-8 MO Round Bar and Rods

PH 13-8 Mo stainless steel is a martensitic precipitation/age-hardening stainless steel capable of high strength and hardness along with good levels of resistance to both general corrosion and stress-corrosion cracking. In addition, the alloy exhibits good ductility and toughness in large sections in both the longitudinal and transverse directions. The excellent properties of PH 13-8 Mo stainless are obtained through close control of chemical composition and microstructure plus specialized melting which reduces impurities and minimizes segregation. Compared to other ferrous-based materials, this alloy offers a high level of useful mechanical properties under severe environmental conditions.

13-8 stainless alloy (UNS S13800) is a martensitic precipitation-hardening stainless steel that has excellent strength, high hardness, superior toughness, and good corrosion resistance. Compared to other ferrous-base materials alloy 13-8 Stainless Steel offers a high level of useful mechanical properties under severe environmental conditions. Alloy 13-8 Stainless Steel is used in Aerospace components, landing gear, nuclear reactor components, petrochemical industry, injection molding equipment etc. Alloy 13-8 Stainless Steel in the annealed condition can be strengthened further by relatively low temperature heat treatment.

13-8 Mo stainless has good fabrication characteristics and can be age-hardened by a single low temperature treatment. Cold work prior to aging increases the aging, especially for lower aging tempratures. 13-8 Mo stainless has been used for valve parts, fittings, cold-headed and machined fasteners, shafts, landing gear parts, pins, lock washers, aircraft components, nuclear reactor components and petrochemical applications requiring resistance to stress-corrosion cracking. Generally, this alloy should be considered where high strength, toughness, corrosion resistance, and resistance to stress-corrosion cracking are required in a steel showing minimal directionality in properties.

PH 13-8 Mo | 1.4534 |UNS S13800 |ASTM XM-13 | 13-8Mo

Description of PH 13-8 Mo | 1.4534 |UNS S13800 |ASTM XM-13 | 13-8Mo :

PH 13-8Mo stainless is age-hardening stainless steel capable of high strength and hardness along with good levels of resistance to both general corrosion and stress-corrosion cracking. In addition, the alloy exhibits good ductility and toughness in large sections in both the longitudinal and transverse directions. The excellent properties of PH 13-8 Mo stainless are obtained through close control of chemical composition and microstructure plus specialized melting which reduces impurities and minimizes segregation. Compared to other ferrous-based materials, this alloy offers a high level of useful mechanical properties under severe environmental conditions.

13-8 Mo stainless has good fabrication characteristics and can be age-hardened by a single low temperature treatment. Cold work prior to aging increases the aging, especially for lower aging temperatures.

Applications of PH 13-8 Mo | 1.4534 |UNS S13800 |ASTM XM-13 | 13-8Mo :

PH 13-8 Mo stainless has been used for valve parts, fittings, cold-headed and machined fasteners, shafts, landing gear parts, pins, lock washers, aircraft components, nuclear reactor components and petrochemical applications requiring resistance to stress-corrosion cracking. Generally, this alloy should be considered where high strength, toughness, corrosion resistance, and resistance to stress-corrosion cracking are required in steel showing minimal directionality in properties.

Machinability of PH 13-8 Mo | 1.4534 |UNS S13800 |ASTM XM-13 | 13-8Mo :

The alloy 13-8 Mo can be machined in the solution-annealed and in the various age-hardened conditions. To obtain optimum machinability, treat solution annealed material at 1400ºF (760ºC) for 2 hours and air cool, then heat to 1150ºF (620ºC) for 4 hours and air cool.

Weldability of PH 13-8 Mo | 1.4534 |UNS S13800 |ASTM XM-13 | 13-8Mo :

The Steel 13-8Mo PH may be welded by shielded fusion or resistance methods. If a filler metal is required a 13-8 type should be used. Heat treatment before and after welding will depend upon required strength levels in both the parent and weld metals.

Technical Data Sheet of PH 13-8 Mo | 1.4534 |UNS S13800 |ASTM XM-13 | 13-8Mo :

We Export our Stainless Steel PH 13-8Mo Round Bars and Rods to:

Puerto Rico, Namibia, Mexico, Iran, Bulgaria, Japan, United Kingdom, Sri Lanka, Qatar, Netherlands, Mongolia, Sweden, Philippines, Brazil, Ireland, Chile, Belgium, Switzerland, Macau, Bahrain, Zimbabwe, Taiwan, Saudi Arabia, Singapore, India, United States, Gabon, Bolivia, Croatia, Estonia, Nigeria, Russia, Jordan, Peru, Malaysia, South Korea, Ecuador, Chile, Venezuela, Austria, Afghanistan, Argentina, Azerbaijan, Iran, Iraq, Poland, Finland, Bhutan, Ghana, Nepal, Lebanon, Oman, Israel, Libya, Nigeria, Belarus, Czech Republic, Portugal, Thailand, South Africa, Egypt, Vietnam, Mexico, Kuwait, Norway, Italy, Tibet, France, Slovakia, Gambia, Lithuania, Denmark, Turkey, Costa Rica, Indonesia, Colombia, Australia, Kenya, Canada, Morocco, Spain, Greece, United Arab Emirates, Poland, China, Romania, Trinidad & Tobago,Tunisia, New Zealand, Germany, Yemen, Pakistan, Bangladesh, Hungary, Kazakhstan, Algeria, Serbia, Ukraine, Hong Kong, Angola.

We Supply our Stainless Steel PH 13-8Mo Round Bars and Rods to :

New York, Gurgaon, Houston, Courbevoie, Hong Kong, Rajkot, Pimpri-Chinchwad, Muscat, Vung Tau, Jaipur, Santiago, London, Mexico City, Toronto, Jeddah, Tehran, Lahore, Calgary, Ulsan, La Victoria, Dallas, Seoul, Granada, Port-of-Spain, Melbourne, New Delhi, Milan, Chandigarh, Geoje-si, Bogota, Faridabad, Perth, Ahvaz, Vadodara, Busan, Secunderabad, Rio de Janeiro, Al Khobar, Petaling Jaya, Ernakulam, Ranchi, Istanbul, Caracas, Atyrau, Nagpur, Ankara, Montreal, Abu Dhabi, Kuala Lumpur, Al Jubail, Algiers, Visakhapatnam, Riyadh, Ho Chi Minh City, Dammam, Bengaluru, Hanoi, Chiyoda, Dubai, Navi Mumbai, Doha, Sydney, Baroda, Los Angeles, Manama, Surat, Jakarta, Hyderabad, Thane, Madrid, Bangkok, Nashik, Kolkata, Cairo, Brisbane, Mumbai, Sharjah, Haryana, Howrah, Kuwait City, Jamshedpur, Gimhae-si, Lagos, Moscow, Pune, Aberdeen, Karachi, Singapore, Colombo, Thiruvananthapuram, Noida, Chennai, Edmonton, Coimbatore, Ludhiana, Kanpur, Bhopal, Indore, Ahmedabad.