XAR 400 Wear Resistant Steel Plates / Sheets Importer, Stockist, Supplier, Exporter From Mumbai
Wear Resistant Steel XAR 400
XAR (Extra Abrasion Resistant) steels from Thyssenkrupp Steel Europe are the solution for applications where wear is a key factor. XAR is available in various grades from 300 HBW to 600 HBW and plate thicknesses from 1/6” to 4” (4 to 100 mm), tailored to particular applications, e.g. mining equipment, earthmoving machinery, steel mill and cement plant equipment, agricultural machinery, etc. XAR 400, XAR 450 and XAR 500 plates can also be supplied as cut-to-length plates in thicknesses up to approx. 3/8” (10 mm).
- Hardnesses up to 600 Brinell
- At least five times the service life of conventional structural steel
- Ideal for press braking and bending
- Good welding and cutting properties
New Arise Metal is one of the prominent XAR 400 Wear Abrasion Resistant Sheet Plates Suppliers, Manufacturer & Exporters. New Arise Metal is one of the leading importers & stockiest of XAR 400 steel. The XAR 400 is the wear plate series form Nippon Sumitomo Steel Metal Corporation, Japan. The use of abrasion resistance XAR 400 steel plate markedly reduces the weight of structural members exposed to serve abrasive conditions. Compare with regular steel, XAR steel plate reduces structural weight and delivers economic merits. Adoption of high performance abrasion resistant XAR 400 will prolong the service life of machinery and component.
New Arise Metal is one of the main shipper and stockiest of XAR400 Wear Abrasion Resistant Sheet & Plates. XAR 400 Wear Abrasion Resistant Sheet Plates Manufacturer, XAR 400 Wear Abrasion Resistant Sheet Plates Exporter, XAR 400 Sheets, XAR 400 Plates, XAR 400 Equivalent Plates, XAR 400 Equivalent Sheets, XAR 400 Plates Sheets, XAR Sheets Plates Mumbai, XAR drilling Sheets Plates, Wear Plates, 400 XAR Plates Sheets
The utilization of scraped area resistance XAR 400 steel plate especially diminishes the heaviness of auxiliary individuals presented to serve grating conditions. Contrast and customary steel, XAR400 Wear Abrasion Resistant Sheet Plates diminishes auxiliary weight and conveys monetary benefits. Selection of elite scraped spot safe XAR400 Wear Abrasion Resistant Sheet Plates will draw out the administration life of apparatus and part. We keep up every one of the sizes and thickness of XAR400 Wear Abrasion Resistant Sheet Plates from 03mm ~ 60mm thickness
Wear resistant steel is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate. Typical applications are in truck beds, attachments to diggers and earth movers and in processing applications in the mining industry.
The key quality for wear resistant steels is their hardness. We sell wear plate according to its hardness measured on the Brinnell Hardness Test – usually in 400HB and 500HB grades. If your specification is to the Rockwell Test we can also advise.
Steels with a high HB rating (Brinell Hardness) are intended for applications where wear or abrasion resistance is important. The benefit of using an abrasion resistant steel is that that the plant, machinery or constructions working life can be extended considerably. This can significantly improve the reliability, durability and safety of structures and equipment. It also helps to reduce the maintenance costs associated with wear and breakdown of plant.
400 HB steel is over 3 times harder than mild steel (120HB), but only a third as hard as stainless steel (1250HB). Example uses are for construction machinery, skips, bulldozers and excavators, buckets and conveyors. The steel is quenched which provides wear resistance; in order to improve hardness it may also be tempered. Lower HB’s generally provide good cold bending properties and good weldability. Weldability is not generally reduced as the hardness increases.
Scope of XAR 400
This Material Specification applies to plates of the wear resistant special structural steel XAR 400 in thicknesses from 3 mm up to 100 mm (0.118 in. to 3.937 in.) Other Dimensions on special inquiry.
Material Number : 1.8714
Overview of XAR 400 Plates / Sheet:
- Sheet thickness 3 – 100 mm
- Brinell hardness 370 – 430
This steel is characterized by its high wear resistance. It is especially suitable for cold forming (bending) and welding.
XAR 400 W
- Sheet thickness 3 – 50 mm
- Brinell hardness 360 – 440
This steel is the heat-proof variant of XAR 400, and is always used where high hardness and wear resistance are required at temperatures up to 400°C.
Applications of XAR 400
The steel may be used at the discretion of the purchaser for wear exposed structures
- Earth Moving Machinery
- Truck Dump Bodies
- Pulverizing Equipment
- Scrap Presses
- Paving moulds
- Switch Manufacturing
- Cement Plant Equipment
- Agricultural Machinery
The Processing and application techniques as a whole are of fundamental importance for the successful use of the products fabricated of this steel. The Processor / Fabricator must assure himself that his design and work methods are appropriate for the material are state of the art and are suitable for the envisaged purpose.
Other Products of XAR STEEL
- XAR 300
- XAR 400
- XAR 400 PREMIUM
- XAR 400 W
- XAR 450
- XAR 450 PREMIUM
- XAR 500
- XAR 500 PREMIUM
- XAR 600
- XAR HT
Thanks to their extreme hardness and toughness, XAR heavy plates last at least five times longer than conventional structural steel.