Dillimax 400V Wear Resistant Steel Plates / Sheets Importer, Stockiest, Supplier, Exporter From Mumbai
Dillimax 400V Wear Resistant Steel Plate
DILLIMAX 690B Plates
DILLIMAX 690T Plates
DILLIMAX 690E Plates
High Strength Fine Grained Structural Steel Quenched and Tempered
DILLIMAX 690 is a high strength quenched and tempered, fine grained structural steel with a minimum yield strength of 690 MPa (100 ksi) in its delivery condition (referring to the lowest thickness range). Its mechanical properties are achieved by water quenching followed by tempering. DILLIMAX 690 is preferentially used for welded steel structures within mechanical constructions, plant constructions and structural steel works, such as machines for structural engineering, conveying plants, hoists, cranes, flood gates, bridges and frameworks.
Product description :
Designation and range of application
DILLIMAX 690 can be delivered in three qualities:
|Basic (B) with minimum impact values down to -20 °C (-4 °F)||DILLIMAX 690 B|
|Steel number 1.8931 - S690Q according to EN 10025-6|
|Tough (T) with minimum impact values down to -40 °C (-40 °F)||DILLIMAX 690 T|
|Steel number 1.8928 - S690QL according to EN 10025-6|
|Extra tough (E) with minimum impact values down to -60 °C (-76 °F)||DILLIMAX 690 E|
|Steel number 1.8988 - S690QL1 according to EN 10025-6|
DILLIMAX 690 can be delivered in thicknesses from 6 to 200 mm (¼ to 8 in.), according to the dimensional program. Dimensions, which deviate from the usual dimensional program, may be possible on request. DILLIMAX 690 fulfils the requirements of EN 10025-6.
Dimensions and Size of DILLIMAX 400V :
|Thickness||:||12 - 60 mm|
|Width||:||1500 - 3500 mm|
|Length||:||3000 - 12000 mm|
|Grade||:||S690QL EN10137-2 EN10025-6:2004|
|:||A709-100, DILLIMAX 690, NAXTRA 70|
|:||WELDOX 700, E690, JFE HITEN 780LE, ALFORM 700|
The entire processing and application techniques are of fundamental importance to the reliability of products made from this steel. The user should ensure that his design, construction and processing methods are aligned with the material, correspond to the state-of-the-art that the fabricator has to comply with and are suitable for the intended use. The customer is responsible for the selection of the material. The recommendations of the EN 1011-2 (Welding) and CEN/TR 10347 (Forming) as well as recommendations regarding job safety in accordance with national rules should be observed.
NEW ARISE METAL also Distribute Other Types of S690QL Structural Steel Plate Namely:
S700MC, DILLIMAX 690, DILLIMAX 690E, DILLIMAX 690T, S690QL EN10137-2, JFE HITEN 780LE, WELDOX 700, ALFORM 700, ALFORM 700M, ALDUR 700Q, ALDUR 700 QL, 1.8928, NAXTRA 70, NAXTRA M700, MAXIL 690, SUPRALSIM 690, SUPERELSO 690, WELDOX® 700E, ASTM A709-100, etc.