UNS S21800 Round Bar, Rods, Nitronic 60 Round Bar, Alloy 218 Round Bars & Rods
UNS S21800 / ALLOY 218 / NITRONIC 60 Round Bar / Rods
Material Descriptions :
NITRONIC 60 is silicon/manganese alloyed austenitic stainless steel with double yield strength of AISI 304 material. The increased silicon and manganese level inhibit wear, galling and fretting and makes the alloy fit for temperatures up to 1000°C. General corrosion resistance is between AISI 304 and 316. It offers better chloride pitting resistance, stress corrosion cracking resistance and crevice corrosion resistance than AISI 316L in laboratory conditions.
New Arise Metal Stock & Export Nitronic 60, Alloy 218 Rods & Bars in various grades, sizes and specifications as required. We source from reputed and approved mills throughout the world and deliver to our clients. We deliver Nitronic 60 Rods & Bars with complete EN 10204:3.1/3.2 certification. TPI also welcome.
Nitronics 60 Round Bars Specifications :
- Standard :ASTM A276, A479 / ASME SA276, SA479
- Specification :ASTM, ASME and API
- Size :6mm to 300 mm
- Length :1 to 6 Meters, Custom Cut Lengths
- Finishing :Bright, Polish & Black
- Forms :Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire mesh, Billet, Ingot, Forging Etc.,
- Conditions : Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished
- Grades: Nitronic 60, ALLOY 218, UNS S21800
- Size Range of Round bars: 1/2”-12” Diameter.
- Finish: Black, Bright, Cold Drawn, Peeled, Turned, Polished & Forged.
Applications using NITRONIC 60, Alloy 218, UNS S21800 are valve stems, seats and trim, fastening systems, screening, pins, bushings and roller bearings, pump shafts and rings. Other uses include wear plates, rails guides, and bridge pins. This alloy provides a significant lower cost way to fight wear and galling compared to Nickel or Cobalt based alloys.
Chemical Composition :
|Nitronic 60, Alloy 218, UNS S21800||MIN.||3.50||7.00||16.00||8.00||0.08|
ASME SA479 NITRONIC 60 Hot-Rolled Round Bars Mechanical Properties :
|Grade||Tensile Strength (ksi) min||Elongation (% in 50mm) min||Yield Strength 0.2% Proof (ksi) min||Hardness|
NITRONIC 60 Rods, NITRONIC 60 Bars, NITRONIC 60 Bright Rods, NITRONIC 60 Bright Round bars, NITRONIC 60 Forged bars, ALLOY 218 Rods, ALLOY 218 Bars, ALLOY 218 Bright Rods, ALLOY 218 Bright Round bars, ALLOY 218 Forged bars etc.
If any special requirement arises, we have facility for hardening, tempering & annealing of bars for required Mechanical & Physical properties.