11-14% Manganese Steel Plate | 11-14% Manganese Plate Suppliers | 11-14% Manganese Plate Stockists | 11-14% Manganese Steel Plate Exporters
High Manganese Plate, 11-14% Manganese Plate, 12-14% Manganese Plate.
High Manganese Steel Plates & Sheets (11-14% Manganese Plates)
M/s New Arise Metal is one of the Largest Stockist & Suppliers of High Manganese Steel Plates and Sheets to determination X120Mn11 and 1.3401. As a high manganese steel grade it offers fantastic work solidifying properties. 11 - 14% Manganese Steel Plates and Sheets turns out to be progressively hard when the surfaces of parts are liable to rehashed effect or scraped spot. Its durability, got from high elasticity and affability, empowers stun prompts be assimilated securely.
The plates are Abrasion Resistant an amazing metal work High strength capacity. Perfect for wearing plates for animating procedure, this manganese steel evaluations are broadly requested in different businesses.
New Arise Metal is Largest 11-14% Manganese Steel Plate Stockholders, Stockiest, Exporter and Suppliers, delivering to the whole of the world. We Supplies 11-14% Manganese Steel Plate to internationally approved quality standards for applications. 11-14% High Manganese Steel Plate have excellent quality to fully satisfy customer’s requirements.
The 11-14% Manganese Steel Plate supplied by us are accepted by clients in various spheres of the industries ranging from basic industries such as Sugar, Paper, Textile, Dairy, Engineering to more complex such as Oil & Gas, Petrochemical, Chemical & Fertilizers, Power Generation and Nuclear Industries.
Displaying outstanding work hardening properties, New Arise Metal’s High Manganese Steel Plate is amenable to high-impact wear applications or those in which gouging abrasion is encountered. In fact, the more beating it is exposed to, the harder our manganese steel gets. In terms of its properties, Hadfield Grade New Arise Metal’s Manganese steel is both a Non-Magnetic and Abrasion Resistant Steel plating product, making it the buyer's choice for magnet bottoms and separator drums.
Our 11-14% Hadfield Grade Steel Wear Plate is heat treated to the point that it develops a hard surface. On the Brinell hardness scale the product reaches a hardness score of 550 BHN through work hardening. This gives our High Manganese Steel almost five times the hardness of mild steel and almost three times the hardness of annealed Stainless Steel. As such, you enjoy a longer lifespan and extended protection of your equipment and facilities. All the while, however High Manganese 11-14% steel maintains a ductile core. That means that despite its tough exterior it can still be readily fashioned into the form you desire.
As it wears, New Arise Metal’s High Manganese steel plate acquires a polished surface, rendering it aesthetically pleasing to the eye. It also affords good lubricity, allowing for an easy, positive flow of material across its surface.
We offer High Grade 11-14% Manganese Steel Plate at affordable price. These 11-14% Manganese Steel Plate are manufactured using finest grade raw material available to ensure international quality. These 11-14% Manganese Steel Plate are available in different shape size and thickness according to the needs of our customer. Owing to highly experienced group of qualified professional and use of latest technology machinery, New Arise Metal have supplied high quality 11-14% Manganese Steel Plate and profiles to customers throughout the worldwide.
As well as being available from stock all 11-14% High Manganese Steel Plate & Sheets can be cut to size and shape according to your fabrication and design requirements and all work is governed by our independently accredited and regularly audited quality systems. Our 11-14% Manganese Steel Plate are sourced from the highest quality steel manufacturers in the world and, like all our suppliers, these manufacturers have been vetted and assessed by our procurement team.
What is 11-14% Manganese Steel Plates & Sheets?
This high manganese grade is an Excellent Work Hardening, Abrasion Resistant Steel. This manganese steel is a non magnetic austenitic type, supplied in full Plates or as profiled pieces by plasma cutting. Suitable for wear applications where high impact/gouging abrasion leads to a work hardening effect. High manganese steel Plates become increasingly hard when the surfaces of components are subject to repeated impact or abrasion. Its toughness, derived from high tensile strength and ductility, enables shock leads to be absorbed safely.
The main Characteristics of High Manganese Plate is a superior wear resistance. Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered Plates) up to an in-service hardness of at least 600 BHN. The Standard of this 11-14 % Manganese includes CREUSABRO, 11-14% Manganese Steel, Head Field Manganese Plates, Manganese Steel, ® M / X110 Mn11 / 11-14% Manganese. Manganese Plates highly durable and have excellent performance find applications in various industries. The high manganese Plates is featured with fully austenitic, quench annealed, non-magnetic, work-hardening steel with an exceptionally high level of wear resistance when subjected to work-hardening by shock or high impact pressure in service.
Manganese plates are manufactured and designed using optimum quality raw material based on advanced machines technology. These manganese plates are available in different dimensions and sizes and can be customized as per the clients’ requirements. The main feature of this manganese plates is its superior wear and resistance.
Applications of High Manganese Steel Grade Plate / Sheet (11-14% Mn Plates & Sheets) :
- Transport parts
- Grizzly Bars
- Truck bed bodies
- Shot Blast Equipment Liners
- Non-Magnetic Applications
- RR Bolster Plates
- Magnetic Drum Liners
- Crusher Liners
- Crusher/Shredder Hammers
- Hammer Build-Up
- Stock Tubes
- Crusher Breaker Plates & Bars
- Shovel Bucket Pins
- Jaw Crusher Build-Ups
- Security Bars
Absence of oil or the interruption of Coarsens or sand particles does not genuinely hamper the wearing surfaces of segments in contact. These 11% - 14% Manganese Steel Plates and Sheets qualities join to make high manganese steel plate perfect steel for use as wearing plates in those circumstances where scraped area, effect, or oil challenges are experienced. The steel has the one of a kind property in administration of quickly building up a work solidified surface whilst holding its extreme inside.
High Manganese Steel Suppliers :
11% to 14% Manganese Steel Plate Suppliers. This high manganese grade is an excellent work hardening, abrasion resistant steel. This steel is a non magnetic austenitic type, supplied in full plates or as profiled pieces by plasma cutting. Suitable for wear applications where high impact/gouging abrasion leads to a work hardening effect.
High Manganese Steel Services :
- Plasma Cutting
Manganese Steel - Stockholders and Suppliers :
Stockist & Suppliers of High Manganese Steel Plate to specifications X120Mn11 and 1.3401. As a high manganese steel grade it offers excellent work hardening properties. High manganese steel plate becomes increasingly hard when the surfaces of components are subject to repeated impact or abrasion. Its toughness, derived from high tensile strength and ductility, enables shock leads to be absorbed safely. Lack of lubrication or the intrusion of grit or sand particles does not seriously impair the wearing surfaces of components in contact. These characteristics combine to make high manganese steel plate an ideal steel for use as wearing plates in those situations where abrasion, impact, or lubrication difficulties are encountered. The steel has the unique property in service of rapidly developing a work hardened surface whilst retaining its tough interior.
Related Specifications :
X110Mn13, DIN 1.3401, ASTM A118 Grade B2, Hadfield Steel Mangalloy Euronorm, GX110Mn11 CSN 42 920 Z110M11 BS3100 BW10, BS EN 10293
Form of Supply :
High manganese steel is supplied in plate. It can be supplied as full plates or plasma cut to your specific requirements.
- Sheets – High Manganese Sheets 11 – 14 % MN
- Plates – High Manganese Plates 11 – 14 % MN
11-14% Manganese Steel Plate Grade and Specification:
|1.3401 – X120Mn13||X120Mn13||W1.3401||A128 Gr B2|
Typical Analysis Chemical Composition / Chemistry:
|Manganese||11.00 - 14.00%|
Stocked Steel Grades:
11/14% Manganese Steel, X120 Mn12, Creusabro M, ASTM A118 Grade B2, X120Mn13, DIN 1.3401, ASTM A118 Grade B2, Hadfield Steel Mangalloy , Euronorm GX110Mn11 ,CSN 42 920, Z110M11 ,BS3100, BW10, BS EN 10293
Supplied water quenched at 950-1000N/mm² X110Mn11 manganese steel has an austenitic structure and is non-magnetic. In its supply condition it has an approximate Brinell hardness of 200HB. In service the material rapidly work hardens, increasing the Brinell hardness figure up to approximately 500HB.
11-14% Manganese Steel Plate Properties :
Chemical Properties of 11-14% Manganese Steel Plate :
Mechanical Properties of 11-14% Manganese Steel Plate :
|Hardness||Yield Strength||UTS||El%||KCV 20°C|
|HB||MPa||MPa||(68°F) – J|
|TypicalValues||220||380||940||40||≥ 112 J|
|(55 KSI)||(136 KSI)||(≥ 83 ft.lbs)|
|(51 KSI)||(116 KSI)||(47 ft.lbs)|
Physical Properties of 11-14% Manganese Steel Plate :
|Density *||Expansion Coeff.0-600°C||SpecificHeat||Electrical *Resistivity||Thermal *Conductivity||Magnetic *Permability|
|Metric US||7.88||10 ⁻⁶ °C ⁻¹21.510 ⁻⁶°F ⁻¹11.9||J/Metric Kg. °C502BTU/lb°F.12||μΩ.m75μΩ.m75||W/m. °C13BTU/hr.ft°F7.3||≈1.002|
Typical Properties :
|Hardness Brinell||Tensile Strength||Yield Strength||Elongation|
11-14% High Manganese Steel Plate Processing :
The majority of normal processing can be performed on 11-14% Manganese Steel Plate.
New Arise Metal Offers Following Processing for 11-14% Manganese Steel Plate :
- Forming Drilling
Typical Application of 11-14% Manganese Steel Plate :
- Stone or Iron Chutes
- Industrial Track work
- Anti drill plates such as security doors
- Shot blasting equipment
- Tumbling machines
11-14% High Manganese Steel Plate Packing & Shipping :
Each order is packaged according to the customer’ s standards including preparation for export such as wooden case, pallet or according to customer’s requirement All shipping documentation is provided for 11-14% Manganese Steel Plate delivery from mill to customer.
Every assignment begins with a visit of our experienced sales representative who assesses the volume / weight of the belongings and briefs the client about the nature of packing required as well as various documentation formalities when moving from India.
Applications of High Manganese 11-14% Steel Plates :
The rapidity with which X120Mn11 work hardens make this steel grade suitable for applications where the components must resist wear under conditions of sliding contact, often coupled with heavy pressure and repeated impact. Typical applications are wearing plates, stone or iron chutes, industrial trackwork, anti drill plates such as security doors, shot blasting equipment and tumbling machines.
If a good edge quality is required plasma arc or laser cutting processes are recommended. Flame cutting is possible but the edge quality is poor. It is possible to shear high manganese steel plate but the blades and machine should be in good condition and the shear should not be operated close to its maximum rated capacity.
Forming can be carried out without difficulty, as the plate in the supplied condition is ductile. To avoid cracking, edges which have been work hardened by shearing should have a 2mm to 3mm chamfer ground along the edge to be formed. To avoid work hardening forming should be carried out in one operation.
Due to its 11% to 14% manganese content the steel is difficult to drill and will work harden very quickly. Heavy duty and very rigid machinery is required using either armour piercing drills in 8% cobalt high speed steel, or preferably use special drills with replaceable carbide inserts. Try to avoid centre punching or allowing the drill to rub on the surface without the feed being engaged, as this will have the effect of work hardening.
With a high coefficient of thermal expansion and low thermal conductivity it is liable to distortion due to local overheating and welding should be carried out at a low thermal level. It is recommended to avoid welding at 300°C to 800°C as this can cause embrittlement due to carbide precipitation. Welding should be carried out using such as E308Mo type austenitic stainless consumables. We recommend you contact your welding consumables supplier who should provide you full assistance and information on welding high manganese steel.
X120Mn11, 1.3401 High Manganese Steel Plate is available with BS EN 10204 3.1 mill certificate, please request when placing any orders.
Supply Area :
We Supply Our 11-14% Manganese Steel Plate to various countries like Saudi Arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa, South America, Brazil, India, Australia, Egypt.
Pressure Vessel Steel Plate Application Industries :
New Arise Metal offer a broad range of 11-14% Manganese Steel Plate through a worldwide network of stock-keeping branches. These 11-14% Manganese Steel Plate is use in various industries like:
- Fertilizers Industry
- Aerospace Industry
- Nuclear Power Plant Industry
- Chemical Industry
- Oil & Gas Industry
- Refineries Industry
- Petrochemical Industry
- Paper Industry
New Arise Metal is largest suppliers of 11-14% Manganese Steel Plate. we are supplying 11-14% Manganese Steel Plate in Saudi Arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa, South America, Brazil, India, Australia, Egypt. We assured our client that we are standing behind our product which we have supplied as well as we issued a quality certificate along with our product which we manufacture supplies and exports
We are also Manufacturers, Suppliers, Exporters and Stockists of Stainless Steel plate, Quenched & Tempered Steel plate , Pressure Vessel Steel plate, High Strength Steel plate, High Nickel Alloy plate, HIC plate, Corten Steel, Clad plate, Alloy Steel plate
Our Steel Products we supply and Stock at Large Scale:
|Alloy Steel Plate SA 387 / A 387||Alloy Steel Pipe SA 335 / A 335||A 106 /API 5L/A53 Gr.B SEAMLESS Pipes & Tubes||Wear Resistant Steel||Pressure Vessel Steel|
|Boiler Steel Plate||Structural Steel Sections||Pipes/Tubulars||Hot Rolled Plate||Stainless Steel Plates|
|Heat Resistant Steel||Chrome Moly Steel||Structural Steels||HIC Resistant Steel||High Tensile Steel Plate|
|XAR-500 6mm - 50mm (450 - 530 HB)||RAEX AR 400 (360 - 440 HB)||XAR-300 8mm - 50mm (270 340 HB)||XAR-400 3mm - 100mm plus (360 - 440 HB)||XAR-600 (550 HB)|
|FORA 400 (360 - 440 HB)||RAEX 700 MC 3mm – 5mm||12-14% Manganese||COR-TEN||Types & Grades of Corten Steel|
|High Manganese Steel||Hardox® Plates||Armour Steel Plates||EN19 Grade Steel Plate|
11-14% Manganese steel plate | Emergency Suppliers 11-14% Manganese steel plate | 11-14% Manganese steel plate Suppliers | 11-14% Manganese steel plate Stockists | 11-14% Manganese steel plate Exporters.